NAS-Port-Type values: Additional Values for the NAS-Port-Type Attribute
Five additional RADIUS NAS-Port-Type values for PPP connection types.
Zorn, G., Weber, G., and R. Foltak, "Additional Values for the NAS-Port-Type Attribute", RFC 4603, DOI 10.17487/RFC4603, July 2006, <https://www.rfc-editor.org/info/rfc4603>.
@misc{rfc4603,
series = {Request for Comments},
number = 4603,
howpublished = {RFC 4603},
publisher = {RFC Editor},
doi = {10.17487/RFC4603},
url = {https://www.rfc-editor.org/info/rfc4603},
author = {G. Zorn and G. Weber and R. Foltak},
title = {{Additional Values for the NAS-Port-Type Attribute}},
pagetotal = 5,
year = 2006,
month = jul,
} RFC text
Contents
Network Working Group G. Zorn
Request for Comments: 4603 G. Weber
Category: Informational R. Foltak
Cisco Systems
July 2006
Additional Values for the
NAS-Port-Type Attribute
Status of This Memo
This memo provides information for the Internet community. It does
not specify an Internet standard of any kind. Distribution of this
memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2006).
IESG Note
This RFC is not a candidate for any level of Internet Standard. The
IETF disclaims any knowledge of the fitness of this RFC for any
purpose and in particular notes that the decision to publish is not
based on IETF review for such things as security, congestion control,
or inappropriate interaction with deployed protocols. The RFC Editor
has chosen to publish this document at its discretion. Readers of
this document should exercise caution in evaluating its value for
implementation and deployment. See RFC 3932 for more information.
Abstract
This document defines a set of values for the NAS-Port-Type RADIUS
Attribute.
Table of Contents
1. Introduction ....................................................2
2. NAS-Port-Type Values ............................................2
3. IANA Considerations .............................................2
3.1. Attribute Values ...........................................2
4. Security Considerations .........................................2
5. References ......................................................3
5.1. Normative References .......................................3
5.2. Informative References .....................................3
1. Introduction
This document defines a set of new values for the NAS-Port-Type
Attribute [RFC2865].
2. NAS-Port-Type Values
This document defines new values for the NAS-Port-Type Attribute.
This specification concerns the following values:
30 PPPoA (PPP over ATM [RFC3336])
31 PPPoEoA (PPP over Ethernet [RFC2516] over ATM)
32 PPPoEoE (PPP over Ethernet [RFC2516] over Ethernet)
33 PPPoEoVLAN (PPP over Ethernet [RFC2516] over VLAN)
34 PPPoEoQinQ (PPP over Ethernet [RFC2516] over IEEE 802.1QinQ)
3. IANA Considerations
3.1. Attribute Values
This document is intended to act as a request for allocation of the
numbers listed by IANA in the appropriate registry [RADTYP],
according to the allocation policy given in [RFC3575].
The values given have already been implemented by at least one vendor
without assignment by IANA.
IANA has registered the numbers listed in Section 2, per this
request.
4. Security Considerations
This specification neither adds to nor detracts from the security of
the RADIUS protocol.
5. References
5.1. Normative References
[RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson,
"Remote Authentication Dial In User Service (RADIUS)", RFC
2865, June 2000.
[RFC3575] Aboba, B., "IANA Considerations for RADIUS (Remote
Authentication Dial In User Service)", RFC 3575, July
2003.
5.2. Informative References
[RADTYP] Internet Assigned Numbers Authority, "RADIUS TYPES",
November 2005, <http://www.iana.org/assignments/radius-
types>.
[RFC2516] Mamakos, L., Lidl, K., Evarts, J., Carrel, D., Simone, D.,
and R. Wheeler, "A Method for Transmitting PPP Over
Ethernet (PPPoE)", RFC 2516, February 1999.
[RFC3336] Thompson, B., Koren, T., and B. Buffam, "PPP Over
Asynchronous Transfer Mode Adaptation Layer 2 (AAL2)", RFC
3336, December 2002.
Authors' Addresses
Glen Zorn
Cisco Systems
2901 Third Avenue, Suite 600
SEA1/5/
Seattle, WA 98121
US
Phone: +1 (425) 344 8113
EMail: gwz@cisco.com
Greg Weber
Cisco Systems
10850 Murdock Road
KNV/1/
Knoxville, TN 37932
US
EMail: gdweber@cisco.com
Rich Foltak
Cisco Systems
2200 East President George Bush Turnpike
RCDN6/4/2
Richardson, TX 75082
US
Phone: +1 (469) 255-6557
EMail: rfoltak@cisco.com
Full Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78 and at www.rfc-editor.org/copyright.html, and
except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
ISO Plain Language
On this page
§1The NAS-Port-Type Attribute
The RFC defines new values for the NAS-Port-Type attribute described in RFC 2865. The attribute values identify the type of access connection represented in RADIUS.
The IESG note says this RFC is not a candidate for any level of Internet Standard and cautions readers to assess its suitability for implementation and deployment.
The memo adds labels for connection types in a RADIUS attribute. Its IESG note warns that publication does not amount to a standards endorsement.
§2The Five New Values
The assigned values are 30 for PPPoA, 31 for PPPoEoA, 32 for PPPoEoE, 33 for PPPoEoVLAN, and 34 for PPPoEoQinQ. The names describe PPP carried over ATM, Ethernet, VLAN, or QinQ arrangements.
The RFC says these values had already been implemented by at least one vendor before IANA assigned them.
Each new number identifies a PPP connection arrangement. The memo says a vendor had already implemented the values before registration.
§3IANA Registration and Security
The document serves as a request for IANA to allocate the listed values in the appropriate RADIUS registry, under the policy in RFC 3575. The text states that IANA registered the numbers.
The security section says the specification neither adds to nor detracts from RADIUS security.
IANA added the five values to the RADIUS registry. The RFC says the change does not affect RADIUS security.