Special Use IPv4 Addresses
The registry of IPv4 address blocks that mean something other than a normal network.
Cotton, M. and L. Vegoda, "Special Use IPv4 Addresses", RFC 5735, DOI 10.17487/RFC5735, January 2010, <https://www.rfc-editor.org/info/rfc5735>.
@misc{rfc5735,
series = {Request for Comments},
number = 5735,
howpublished = {RFC 5735},
publisher = {RFC Editor},
doi = {10.17487/RFC5735},
url = {https://www.rfc-editor.org/info/rfc5735},
author = {M. Cotton and L. Vegoda},
title = {{Special Use IPv4 Addresses}},
pagetotal = 10,
year = 2010,
month = jan,
} RFC text
Contents
Internet Engineering Task Force (IETF) M. Cotton
Request for Comments: 5735 L. Vegoda
BCP: 153 ICANN
Obsoletes: 3330 January 2010
Category: Best Current Practice
ISSN: 2070-1721
Special Use IPv4 Addresses
Abstract
This document obsoletes RFC 3330. It describes the global and other
specialized IPv4 address blocks that have been assigned by the
Internet Assigned Numbers Authority (IANA). It does not address IPv4
address space assigned to operators and users through the Regional
Internet Registries, nor does it address IPv4 address space assigned
directly by IANA prior to the creation of the Regional Internet
Registries. It also does not address allocations or assignments of
IPv6 addresses or autonomous system numbers.
Status of This Memo
This memo documents an Internet Best Current Practice.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
BCPs is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc5735.
Copyright Notice
Copyright (c) 2010 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Global and Other Specialized Address Blocks . . . . . . . . . 3
4. Summary Table . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Assignments of IPv4 Blocks for New Specialized Uses . . . . . 6
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6
7. Security Considerations . . . . . . . . . . . . . . . . . . . 7
8. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 7
9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 7
9.1. Normative References . . . . . . . . . . . . . . . . . . . 7
9.2. Informative References . . . . . . . . . . . . . . . . . . 7
Appendix A. Differences between This Document and RFC 3330 . . . 10
1. Introduction
Throughout its history, the Internet has employed a central Internet
Assigned Numbers Authority (IANA) responsible for the allocation and
assignment of various identifiers needed for the operation of the
Internet [RFC1174]. In the case of the IPv4 address space, the IANA
allocates parts of the address space to Regional Internet Registries
(RIRs) according to their established needs. These RIRs are
responsible for the registration of IPv4 addresses to operators and
users of the Internet within their regions.
On an ongoing basis, the IANA has been designated by the IETF to make
assignments in support of the Internet Standards Process [RFC2860].
Section 4 of that document describes that assignment process.
Small portions of the IPv4 address space have been allocated or
assigned directly by the IANA for global or other specialized
purposes. These allocations and assignments have been documented in
a variety of RFCs and other documents. This document is intended to
collect these scattered references and provide a current list of
special use IPv4 addresses.
This document is a revision of RFC 3330 [RFC3330], which it
obsoletes; its primary purpose is to reflect the changes to the list
of special IPv4 assignments since the publication of RFC 3330. It is
a companion to [RFC5156], which describes special IPv6 addresses.
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in BCP 14, [RFC2119].
3. Global and Other Specialized Address Blocks
0.0.0.0/8 - Addresses in this block refer to source hosts on "this"
network. Address 0.0.0.0/32 may be used as a source address for this
host on this network; other addresses within 0.0.0.0/8 may be used to
refer to specified hosts on this network ([RFC1122], Section
3.2.1.3).
10.0.0.0/8 - This block is set aside for use in private networks.
Its intended use is documented in [RFC1918]. As described in that
RFC, addresses within this block do not legitimately appear on the
public Internet. These addresses can be used without any
coordination with IANA or an Internet registry.
127.0.0.0/8 - This block is assigned for use as the Internet host
loopback address. A datagram sent by a higher-level protocol to an
address anywhere within this block loops back inside the host. This
is ordinarily implemented using only 127.0.0.1/32 for loopback. As
described in [RFC1122], Section 3.2.1.3, addresses within the entire
127.0.0.0/8 block do not legitimately appear on any network anywhere.
169.254.0.0/16 - This is the "link local" block. As described in
[RFC3927], it is allocated for communication between hosts on a
single link. Hosts obtain these addresses by auto-configuration,
such as when a DHCP server cannot be found.
172.16.0.0/12 - This block is set aside for use in private networks.
Its intended use is documented in [RFC1918]. As described in that
RFC, addresses within this block do not legitimately appear on the
public Internet. These addresses can be used without any
coordination with IANA or an Internet registry.
192.0.0.0/24 - This block is reserved for IETF protocol assignments.
At the time of writing this document, there are no current
assignments. Allocation policy for future assignments is given in
[RFC5736].
192.0.2.0/24 - This block is assigned as "TEST-NET-1" for use in
documentation and example code. It is often used in conjunction with
domain names example.com or example.net in vendor and protocol
documentation. As described in [RFC5737], addresses within this
block do not legitimately appear on the public Internet and can be
used without any coordination with IANA or an Internet registry. See
[RFC1166].
192.88.99.0/24 - This block is allocated for use as 6to4 relay
anycast addresses, in [RFC3068]. In contrast with previously
described blocks, packets destined to addresses from this block do
appear in the public Internet. [RFC3068], Section 7, describes
operational practices to prevent the malicious use of this block in
routing protocols.
192.168.0.0/16 - This block is set aside for use in private networks.
Its intended use is documented in [RFC1918]. As described in that
RFC, addresses within this block do not legitimately appear on the
public Internet. These addresses can be used without any
coordination with IANA or an Internet registry.
198.18.0.0/15 - This block has been allocated for use in benchmark
tests of network interconnect devices. [RFC2544] explains that this
range was assigned to minimize the chance of conflict in case a
testing device were to be accidentally connected to part of the
Internet. Packets with source addresses from this range are not
meant to be forwarded across the Internet.
198.51.100.0/24 - This block is assigned as "TEST-NET-2" for use in
documentation and example code. It is often used in conjunction with
domain names example.com or example.net in vendor and protocol
documentation. As described in [RFC5737], addresses within this
block do not legitimately appear on the public Internet and can be
used without any coordination with IANA or an Internet registry.
203.0.113.0/24 - This block is assigned as "TEST-NET-3" for use in
documentation and example code. It is often used in conjunction with
domain names example.com or example.net in vendor and protocol
documentation. As described in [RFC5737], addresses within this
block do not legitimately appear on the public Internet and can be
used without any coordination with IANA or an Internet registry.
224.0.0.0/4 - This block, formerly known as the Class D address
space, is allocated for use in IPv4 multicast address assignments.
The IANA guidelines for assignments from this space are described in
[RFC3171].
240.0.0.0/4 - This block, formerly known as the Class E address
space, is reserved for future use; see [RFC1112], Section 4.
The one exception to this is the "limited broadcast" destination
address 255.255.255.255. As described in [RFC0919] and [RFC0922],
packets with this destination address are not forwarded at the IP
layer.
4. Summary Table
Address Block Present Use Reference
------------------------------------------------------------------
0.0.0.0/8 "This" Network RFC 1122, Section 3.2.1.3
10.0.0.0/8 Private-Use Networks RFC 1918
127.0.0.0/8 Loopback RFC 1122, Section 3.2.1.3
169.254.0.0/16 Link Local RFC 3927
172.16.0.0/12 Private-Use Networks RFC 1918
192.0.0.0/24 IETF Protocol Assignments RFC 5736
192.0.2.0/24 TEST-NET-1 RFC 5737
192.88.99.0/24 6to4 Relay Anycast RFC 3068
192.168.0.0/16 Private-Use Networks RFC 1918
198.18.0.0/15 Network Interconnect
Device Benchmark Testing RFC 2544
198.51.100.0/24 TEST-NET-2 RFC 5737
203.0.113.0/24 TEST-NET-3 RFC 5737
224.0.0.0/4 Multicast RFC 3171
240.0.0.0/4 Reserved for Future Use RFC 1112, Section 4
255.255.255.255/32 Limited Broadcast RFC 919, Section 7
RFC 922, Section 7
5. Assignments of IPv4 Blocks for New Specialized Uses
The IANA has responsibility for making assignments of protocol
parameters used in the Internet according to the requirements of the
"Memorandum of Understanding Concerning the Technical Work of the
Internet Assigned Numbers Authority" [RFC2860]. Among other things,
[RFC2860] requires that protocol parameters be assigned according to
the criteria and procedures specified in RFCs, including Proposed,
Draft, and full Internet Standards and Best Current Practice
documents, and any other RFC that calls for IANA assignment.
The domain name and IP address spaces involve policy issues (in
addition to technical issues) so that the requirements of [RFC2860]
do not apply generally to those spaces. Nonetheless, the IANA is
responsible for ensuring assignments of IPv4 addresses as needed in
support of the Internet Standards Process. When a portion of the
IPv4 address space is specifically required by an RFC, the technical
requirements (e.g., size, prefix length) for the portion should be
described [RFC5226]. Immediately before the RFC is published, the
IANA will, in consultation with the Regional Internet Registries,
make the necessary assignment and notify the RFC Editor of the
particulars for inclusion in the RFC as published.
As required by [RFC2860], the IANA will also make necessary
experimental assignments of IPv4 addresses, also in consultation with
the Regional Internet Registries.
6. IANA Considerations
This document describes the IANA's past and current practices and
does not create any new requirements for assignments or allocations
by the IANA.
7. Security Considerations
The particular assigned values of special use IPv4 addresses
cataloged in this document do not directly raise security issues.
However, the Internet does not inherently protect against abuse of
these addresses. If you expect (for instance) that all packets from
a private address space such as the 10.0.0.0/8 block or the link
local block 169.254.0.0/16 originate within your subnet, all routers
at the border of your network should filter such packets that
originate from outside your network. Attacks have been mounted that
depend on the unexpected use of some of these addresses.
It should also be noted that some of these address spaces may be used
legitimately outside a single administrative domain, and may appear
on the global Internet. Security policy SHOULD NOT blindly filter
all of these address spaces without due consideration, and network
operators are encouraged to review this document, and references
contained therein, and determine what security policies should be
associated with each of these address blocks within their specific
operating environments.
8. Acknowledgments
Many people have made comments on draft versions of this document.
The authors would especially like to thank Scott Bradner, Randy Bush,
Harald Alvestrand, Peter Koch, Alfred Hoenes, and Jari Arkko for
their constructive feedback and comments. They would also like to
offer a special note of thanks to APNIC, which nominated
198.51.100.0/24 and 203.0.113.0/24.
9. References
9.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
9.2. Informative References
[RFC0919] Mogul, J., "Broadcasting Internet Datagrams", STD 5,
RFC 919, October 1984.
[RFC0922] Mogul, J., "Broadcasting Internet datagrams in the
presence of subnets", STD 5, RFC 922, October 1984.
[RFC1112] Deering, S., "Host extensions for IP multicasting", STD 5,
RFC 1112, August 1989.
[RFC1122] Braden, R., "Requirements for Internet Hosts -
Communication Layers", STD 3, RFC 1122, October 1989.
[RFC1166] Kirkpatrick, S., Stahl, M., and M. Recker, "Internet
numbers", RFC 1166, July 1990.
[RFC1174] Cerf, V., "IAB recommended policy on distributing internet
identifier assignment and IAB recommended policy change to
internet "connected" status", RFC 1174, August 1990.
[RFC1700] Reynolds, J. and J. Postel, "Assigned Numbers", RFC 1700,
October 1994.
[RFC1918] Rekhter, Y., Moskowitz, R., Karrenberg, D., Groot, G., and
E. Lear, "Address Allocation for Private Internets",
BCP 5, RFC 1918, February 1996.
[RFC2544] Bradner, S. and J. McQuaid, "Benchmarking Methodology for
Network Interconnect Devices", RFC 2544, March 1999.
[RFC2860] Carpenter, B., Baker, F., and M. Roberts, "Memorandum of
Understanding Concerning the Technical Work of the
Internet Assigned Numbers Authority", RFC 2860, June 2000.
[RFC3068] Huitema, C., "An Anycast Prefix for 6to4 Relay Routers",
RFC 3068, June 2001.
[RFC3171] Albanna, Z., Almeroth, K., Meyer, D., and M. Schipper,
"IANA Guidelines for IPv4 Multicast Address Assignments",
BCP 51, RFC 3171, August 2001.
[RFC3330] IANA, "Special-Use IPv4 Addresses", RFC 3330,
September 2002.
[RFC3927] Cheshire, S., Aboba, B., and E. Guttman, "Dynamic
Configuration of IPv4 Link-Local Addresses", RFC 3927,
May 2005.
[RFC5156] Blanchet, M., "Special-Use IPv6 Addresses", RFC 5156,
April 2008.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008.
[RFC5736] Huston, G., Cotton, M., and L. Vegoda, "IANA IPv4 Special
Purpose Address Registry", RFC 5736, January 2010.
[RFC5737] Arkko, J., Cotton, M., and L. Vegoda, "IPv4 Address Blocks
Reserved for Documentation", RFC 5737, January 2010.
Appendix A. Differences between This Document and RFC 3330
Address blocks that were reserved for a special purpose in RFC 3330
but are no longer reserved for any special purpose and are available
for allocation are no longer listed in Sections 4 or 5. The
following blocks have become available:
- 14.0.0.0/8 is no longer set aside for assignments to the
international system of Public Data Networks [RFC1700], page 181.
It is now available for allocation to RIRs in the normal way.
- 24.0.0.0/8 is no longer listed as the addresses in that block have
been managed by the American Registry for Internet Numbers (ARIN)
in the normal way since 2001.
- 39.0.0.0/8 is no longer listed as it has been subject to
allocation to an RIR for assignment in the normal manner since
2001.
- 128.0.0.0/16 is not reserved and is subject to future allocation
by a Regional Internet Registry for assignment in the normal
manner.
- 191.255.0.0/16 is not reserved and is subject to future allocation
by a RIR for assignment in the normal manner.
- 198.51.100.0/24 is assigned as "TEST-NET-2" for use in
documentation and example code.
- 203.0.113.0/24 is assigned as "TEST-NET-3" for use in
documentation and example code.
- 223.255.255.0/24 is not reserved and is subject to future
allocation by an RIR for assignment in the normal manner.
Authors' Addresses
Michelle Cotton
Internet Corporation for Assigned Names and Numbers
4676 Admiralty Way, Suite 330
Marina del Rey, CA 90292
USA
Phone: +1-310-823-9358
EMail: michelle.cotton@icann.org
URI: http://www.iana.org/
Leo Vegoda
Internet Corporation for Assigned Names and Numbers
4676 Admiralty Way, Suite 330
Marina del Rey, CA 90292
USA
Phone: +1-310-823-9358
EMail: leo.vegoda@icann.org
URI: http://www.iana.org/
ISO Plain Language
On this page
§1What This Document Covers
Throughout its history the Internet has had a central Internet Assigned Numbers Authority (IANA) responsible for allocating and assigning the identifiers the Internet needs. For the IPv4 address space, the IANA allocates parts of it to Regional Internet Registries (RIRs) according to their established needs, and those registries in turn register addresses to operators and users within their regions. On an ongoing basis the IANA has been designated by the IETF to make assignments in support of the Internet Standards Process.
Small portions of the IPv4 address space have been allocated or assigned directly by the IANA for global or other specialized purposes, and those assignments were documented over the years in a variety of RFCs and other documents. This RFC collects those scattered references into a current list of special use IPv4 addresses. Its primary purpose is to reflect the changes to that list since RFC 3330, which it obsoletes.
The scope has limits that the abstract states plainly. The document does not address IPv4 address space assigned to operators and users through the Regional Internet Registries, and it does not address IPv4 address space assigned directly by the IANA before the Regional Internet Registries were created. It also does not address allocations or assignments of IPv6 addresses or autonomous system numbers. A companion document, RFC 5156, describes the special IPv6 addresses.
This is a catalogue, not a protocol. It lists the small pieces of the IPv4 address space that were set aside for a particular job, and leaves out the ordinary addresses handed out by the regional registries. The IPv6 equivalent is a separate document.
§3The Blocks and What Each Is For
The list starts with the blocks that mean "this network", "private", "me" and "this link". The block 0.0.0.0/8 refers to source hosts on "this" network, and 0.0.0.0/32 may be used as the source address for this host on this network. Three blocks are set aside for private networks: 10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16. Addresses in them do not legitimately appear on the public Internet, and they can be used without any coordination with IANA or an Internet registry. The block 127.0.0.0/8 is assigned for use as the Internet host loopback address: a datagram sent by a higher-level protocol to an address anywhere within the block loops back inside the host, which is ordinarily implemented using only 127.0.0.1/32. The block 169.254.0.0/16 is the link local block, allocated for communication between hosts on a single link; hosts obtain these addresses by autoconfiguration, such as when a DHCP server cannot be found.
The next group exists so that examples can be written without using real addresses. The block 192.0.0.0/24 is reserved for IETF protocol assignments, and at the time of writing there were no current assignments. 192.0.2.0/24 is assigned as "TEST-NET-1" for documentation and example code, and is often used together with the domain names example.com or example.net; 198.51.100.0/24 is "TEST-NET-2" and 203.0.113.0/24 is "TEST-NET-3", both for the same purpose.
Two blocks have uses that do reach the public Internet. 192.88.99.0/24 is allocated for use as 6to4 relay anycast addresses, and unlike the blocks described before it, packets destined to addresses from this block do appear in the public Internet; the referenced RFC describes operational practices to prevent the malicious use of this block in routing protocols. 198.18.0.0/15 has been allocated for benchmark tests of network interconnect devices, and the range was assigned to minimize the chance of conflict in case a testing device were accidentally connected to part of the Internet; packets with source addresses from this range are not meant to be forwarded across the Internet.
The last two blocks come from the old class system. 224.0.0.0/4, formerly known as the class D address space, is allocated for IPv4 multicast address assignments. 240.0.0.0/4, formerly class E, is reserved for future use. The one exception is the limited broadcast destination address 255.255.255.255: packets with that destination are not forwarded at the IP layer.
Some blocks have a job built into them. The private blocks are for networks that are not on the public Internet. The loopback block sends a packet back to the machine that sent it. The link-local block is for two machines on one cable. The documentation blocks are the ones to write in examples so that nobody copies them by mistake. The multicast block is for addressing a group of machines at once.
| Address block | Present use | Reference |
|---|---|---|
| 0.0.0.0/8 | This network | RFC 1122, Section 3.2.1.3 |
| 10.0.0.0/8 | Private-use networks | RFC 1918 |
| 127.0.0.0/8 | Loopback | RFC 1122, Section 3.2.1.3 |
| 169.254.0.0/16 | Link local | RFC 3927 |
| 172.16.0.0/12 | Private-use networks | RFC 1918 |
| 192.0.0.0/24 | IETF protocol assignments | RFC 5736 |
| 192.0.2.0/24 | TEST-NET-1 | RFC 5737 |
| 192.88.99.0/24 | 6to4 relay anycast | RFC 3068 |
| 192.168.0.0/16 | Private-use networks | RFC 1918 |
| 198.18.0.0/15 | Network interconnect device benchmark testing | RFC 2544 |
| 198.51.100.0/24 | TEST-NET-2 | RFC 5737 |
| 203.0.113.0/24 | TEST-NET-3 | RFC 5737 |
| 224.0.0.0/4 | Multicast | RFC 3171 |
| 240.0.0.0/4 | Reserved for future use | RFC 1112, Section 4 |
| 255.255.255.255/32 | Limited broadcast | RFC 919, RFC 922 |
- Private networks10.0.0.0/8, 172.16.0.0/12 and 192.168.0.0/16 are for private networks. They do not legitimately appear on the public Internet and need no coordination with any registry.
- Loopback127.0.0.0/8 is the host loopback block. A datagram sent to any address in it loops back inside the host, usually through 127.0.0.1.
- Link local169.254.0.0/16 is for hosts on a single link, obtained by autoconfiguration such as when no DHCP server is found.
- Documentation192.0.2.0/24, 198.51.100.0/24 and 203.0.113.0/24 are for documentation and example code, often with example.com or example.net.
- Benchmarking198.18.0.0/15 is for testing network devices, so that a test rig accidentally plugged into the Internet is unlikely to conflict.
- Multicast and reserved224.0.0.0/4 is for multicast, 240.0.0.0/4 is reserved for future use, and 255.255.255.255 is the limited broadcast that is not forwarded at the IP layer.
§5How New Blocks Get Assigned
The IANA is responsible for making assignments of protocol parameters used in the Internet, according to the requirements of the Memorandum of Understanding concerning the technical work of the IANA. That document requires protocol parameters to be assigned according to criteria and procedures specified in RFCs, including Proposed, Draft and full Internet Standards and Best Current Practice documents, and any other RFC that calls for an IANA assignment.
The domain name and IP address spaces involve policy issues as well as technical ones, so the requirements of that memorandum do not apply to those spaces generally. Even so, the IANA is responsible for ensuring assignments of IPv4 addresses as needed in support of the Internet Standards Process. When a portion of the address space is specifically required by an RFC, the technical requirements for that portion, such as its size and prefix length, should be described. Immediately before the RFC is published, the IANA makes the necessary assignment in consultation with the Regional Internet Registries and notifies the RFC Editor of the particulars for inclusion in the RFC as published. The IANA also makes experimental assignments of IPv4 addresses, again in consultation with the Regional Internet Registries.
The IANA considerations section itself is short, because the document describes the IANA's past and current practices and creates no new requirements for assignments or allocations by the IANA.
When a new protocol needs a piece of address space, the RFC that defines it says how big the piece should be, and the IANA hands that piece over just before the RFC is published, in consultation with the regional registries. The same arrangement covers experimental assignments.
§7Security Considerations
The particular values catalogued in this document do not directly raise security issues. The Internet does not inherently protect against abuse of these addresses, though. If a network operator expects that all packets from a private address space such as 10.0.0.0/8, or from the link local block 169.254.0.0/16, originate within their own subnet, then the routers at the border of the network should filter packets of that kind that arrive from outside it. Attacks have been mounted that depend on the unexpected use of some of these addresses.
The RFC also warns against the opposite mistake. Some of these address spaces may legitimately be used outside a single administrative domain and may appear on the global Internet, so a security policy should not blindly filter all of them without due consideration. Operators are encouraged to review the document and the references in it, and decide what policy belongs with each block in their own environment.
These blocks are not automatically safe or automatically dangerous. If you expect private addresses only to come from inside your own network, filter them at the edge, because attacks have used addresses that should never have appeared there. But some of these blocks are legitimately used on the public Internet, so filtering them all without thinking will break working traffic.
§10What Changed Since RFC 3330
The appendix lists the blocks that were reserved for a special purpose in RFC 3330 and are no longer reserved for any special purpose, so they are available for allocation and are no longer listed in the document's main sections. The block 14.0.0.0/8 is no longer set aside for assignments to the international system of Public Data Networks and is now available for allocation in the normal way. The blocks 24.0.0.0/8 and 39.0.0.0/8 are no longer listed, having been managed in the normal way since 2001. The blocks 128.0.0.0/16, 191.255.0.0/16 and 223.255.255.0/24 are not reserved and are subject to future allocation in the normal manner.
Two entries moved in the other direction: 198.51.100.0/24 is now assigned as "TEST-NET-2" for use in documentation and example code, and 203.0.113.0/24 is now assigned as "TEST-NET-3" for the same purpose.
The change from the previous version is mostly about freeing things up. Several blocks that had been reserved for special uses were released back into ordinary allocation, and two blocks were set aside for use in documentation.